I was especially glad to have been able to achieve that square neckline which didn't gape but sat nicely on the shoulders and chest. I find that this is a great difficulty for me and many others when wanting to buy an 'off the peg' dress from the shops. The chest area always gapes! so I end up wearing dresses/tunics mostly made from a stretchy fabric like jersey. A big thanks again to all those more experienced seamstresses from The Sewing Forum who answered a few of the queries I had about this neckline!
The poly satin fabric we used wasn't too much of a nightmare to work with although I did find it difficult to press on a low heat and take to the fusible interfacing at times. This fabric frayed very easily, especially at the bust points where the seam allowances were clipped. Using iron-on interfacing on the seam allowance of these seams really helped me out! and will be something I will be definitely trying out again on other garments.
Hemming this dress was also a tricky choice as it was so fine and snagged very easily. I thought I would be able to hem it by hand but the impression stitches on the right side would have spoilt the hem for sure, no way was I going to spoil the dress right at the end!
So I researched into hemming satin and silk fabrics and decided to use fusible hemming tape which worked beautifully! One word of advice - always, always try out stitches or fusible tapes on a scrap piece of fabric. I had quite a few tries with the tape on scrap pieces of satin before I went ahead and tackled the dress itself. The patience was well worth it!!
