The Final Mouret dress!

Happy new year and apologies for the lack of posts over the holidays! Before the Christmas break I managed to finish the Mouret inspired dress for my friend, Carol. I was really happy with the outcome and so was Carol. Carol choose the perfect colour to complement her complexion and also found some really lovely accessories which matched the dress perfectly. She looked beautifully elegant.


I was especially glad to have been able to achieve that square neckline which didn't gape but sat nicely on the shoulders and chest. I find that this is a great difficulty for me and many others when wanting to buy an 'off the peg' dress from the shops. The chest area always gapes! so I end up wearing dresses/tunics mostly made from a stretchy fabric like jersey. A big thanks again to all those more experienced seamstresses from The Sewing Forum who answered a few of the queries I had about this neckline!




The poly satin fabric we used wasn't too much of a nightmare to work with although I did find it difficult to press on a low heat and take to the fusible interfacing at times. This fabric frayed very easily, especially at the bust points where the seam allowances were clipped. Using iron-on interfacing on the seam allowance of these seams really helped me out! and will be something I will be definitely trying out again on other garments.


Hemming this dress was also a tricky choice as it was so fine and snagged very easily. I thought I would be able to hem it by hand but the impression stitches on the right side would have spoilt the hem for sure, no way was I going to spoil the dress right at the end!
So I researched into hemming satin and silk fabrics and decided to use fusible hemming tape which worked beautifully! One word of advice - always, always try out stitches or fusible tapes on a scrap piece of fabric. I had quite a few tries with the tape on scrap pieces of satin before I went ahead and tackled the dress itself. The patience was well worth it!!